Printer Counter Display/Clear - Oki OKIFAX4550 Maintenance Manual

6.3

Printer Counter Display/Clear

Note: The fonts displayed on the LCD operation panel may differ from the fonts written this manual.
1. Purpose
A user can clear the image drum unit and check some of the counters (such as the print
counter, scan counter) by using the ← key or → key.
2-1. Procedure
The following shows the case when the service bit has been set OFF & TONER
COUNT CLEAR = OFF.
Operations:
To bring the LCD up to the desired message,
press SELECT FUNCTION key once and
one-touch key No.7 in the standby mode.
(In case of no message in the memory)
←
Press key or
Note: Clear Operation
No. of print counter and scan counter (pages) will appear but cannnot be cleared by
user.
User can clear only DRUM counter.
After having cleared the drum counter, warning message will be disappeared.
41309401TH Rev.4
→
key.
ARE YOU SURE ?
YES (←) NO(→)
← Key
→ Key
CLEAR
End of programming
(Flash memory writing)
The display shows:
SELECT FUNCTION (OT)
MEMORY AVAIL.= 100%
Press OT7
DRUM COUNT
CLEAR (←) NEXT(→)
← Key → Key
PRINT COUNT XXXXXX
NEXT(→)
→ Key
SCAN COUNT XXXXXX
NEXT(→)
→ Key
186 /