Oki OKIFAX4550 Maintenance Manual page 78

T.F.
Item
No.
09 MDY/DMY
10 Long document SCAN
11 Tone for Echo
12 MH only
13 High-speed modem rate
14 T1 (TX), timeout value
15 T1 (RX), timeout value
41309401TH Rev.4
Table 2.2 (3/8) Service Personnel Initial Settings
Switches LCD display and report print from
month/day/year to day/month/year or vice versa.
MDY/DMY selectable.
Switches the function of transmitting long-size
document (more than 360 mm).
ON :
OFF : 360 mm or 60 min.
Note:
Switches the function to apply to poor lines with
echo in overseas transmission, etc.
ON:
OFF: Disables
Switches the function of limiting image compres-
sion to the MH codes only.
ON :
OFF : Any of MH, MR and MMR.
Specifies the modem's starting speed, 33.6K,
28.8K, 14.4k, 9.6k, or 4.8kbps.
T1 (TX) is a time to detect up to 3 flags of DIS sent
from a called fax machine.
Registers the time duration (in seconds) for
which the fax waits for the remote station's
answer.
This timer starts when the last dialled digit has
been sent in the automatic transmission mode.
* Selects the 3 digit timer
010 to 255 sec selectable.(in one second
steps)
T1 (RX), timeout value (later)
Registers the time duration (in seconds) for
which the fax waits for the remote station's
answer of individual country's specification. This
timer starts after the DIS is transmitted. If T1
times out, the fax disconnects the line.
*
Specifications
1500 mm or 60 min.
60 min is transmitting time.
Enables
Echo Protection OFF
Ignore 1st DIS OFF
CED-DIS timer 75 ms
Tone for echo OFF
(TF-11 table)
Coding scheme is MH only. When the
receiving image data is affected by noise
on the telephone line.
Selects the 3 digit timer
010 to 255 sec selectable. (in one second steps)
Default
ON
ON
1.5 sec
ON
78 /