Prestige 310 Broadband Internet Access Router
7.1
System Status
The first selection, System Status, gives you information on the version of your system firmware
and the status and statistics of the ports, as shown in below. System Status is a tool that can be
used to monitor your Prestige. Specifically, it gives you information on your system firmware
version, number of packets sent and number of packets received.
To get to the System Status, Enter number 24 to go to Menu 24 - System Maintenance. In this
menu, enter number 1 to open, System Maintenance - Status. There are two commands in Menu
24.1 - System Maintenance - Status. Entering 9 resets the counters, and ESC takes you back to
the previous screen.
The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It
should be noted that these fields are READ-ONLY and are meant to be used for diagnostic
purposes.
Port
Status
WAN
Down
LAN
Down
Port:
Ethernet Address
WAN
00:a0:c5:21:8c:a3
LAN
00:a0:c5:21:8c:a2
System up Time:
Name:
Routing: IP
ZyNOS F/W Version: V2.30b07 | 5/7/1999
7-2
Menu 24.1 -- System Maintenance – Status
TxPkts
RxPkts
1
0
IP Address
0.0.0.0
192.168.1.1
67:08:22
Press Command:
COMMANDS: 9-Reset Counters
Figure 7-2 Menu 24.1 - System Maintenance – Status
Cols
Tx B/s
0
0
0
0
0
0
255.255.255.0
ESC-Exit
Rx B/s
Up Time
0
0:00:00
0
0:00:00
IP Mask
DHCP
0.0.0.0
Client
Server
System Maintenance