Table of Contents
Advertisement
Prestige 681 SDSL Router
11.1 System Status
The first selection, System Status, gives you information on the status and statistics of the ports, as shown
below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you
information on your SDSL line status, number of packets sent and received.
To get to the System Status, enter number 24 to go to Menu 24 - System Maintenance. From this menu,
select number 1, System Status. There are two commands in Menu 24.1 - System Maintenance -
Status. Entering 1 resets the counters and ESC takes you back to the previous screen.
The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.
Please note that displaying this screen degrades system performance.
NodeName
Status
John
Ethernet:
Status: 100M/Full Duplex
Collisions: 0
CPU Load = 4.25%
Figure 11-2
The following table describes the fields present in Menu 24.1 - System Maintenance - Status.
11-2
Menu 24.1 -- System Maintenance – Status
TXPkts
RXPkts
Up
1462
1567
Tx Pkts: 1583
Rx Pkts: 1521
Press Command:
CMDS: 1-Reset Counters
Menu 24.1 - System Maintenance – Status
Errors
Tx
B/s
0
222
WAN:
Line Status: Synchronizing
Transfer Rate: 784 kbps
ESC-Exit
Rx B/s
Up Time
211
2:15:16
System Maintenance
Advertisement
Table of Contents
