Oki Data CONFIDENTIAL
4.2.12 Duplex Belt Assy
(1) Take out the Frame-Assy-TR. (Refer to 4.2.11)
(2) Remove the cassette and set the printer unit on its right side.
(3) Remove the E-ring (RE4-SK)
the arrow.
(4) Remove the screw (Silver)
(5) Remove the four pieces of Bearing
(6) Installing is performed by the inverse procedure with removing.
Shaft-Dup-Clutch
44871001TH Rev.6
and slide the Shaft-Dup-Clutch in the direction of
and Frame-Duplex-Assy
.
, Roller-Feed-Duplex
and Duplex-Belt
4.2.13 DC Motor
(1) Remove the Cover Side (R). (Refer to 4.2.2)
(2) Remove the screw (Silver)
.
(3) Remove four screws (Silver)
View A
View A
4.REPLACEMENT OF PARTS
, and remove FG-Cable
.
, and remove PlateShield (CU)
.
View B
View A
View A
View B
View B
4-32