Wireless Troubleshooting - Oki MB461 Maintenance Manual

Oki Data CONFIDENTIAL

8.5.10 Wireless Troubleshooting

(1) Cannot print through Wireless Network.
Confirmation Items
(1) Check Network Connection setting.
Check Network Connection is Print out the network information.
Wireless not Wired. Check Network Connection
setting is Wireless.
(2) Check the connection to the wireless LAN access point.
Check that the wireless LAN Check the panel of the device,
setting is right and the device and Check whether the status
is connecting to the wireless ("Not connected to wireless
LAN access point. access point.") has occurred.
Check the panel of the device,
and Check whether the
status ("Wireless settings are
incomplete.") has occurred.
(3) Check whether it is possible to communicate by way of wireless LAN.
Check whether it is possible Please refer to Network Troubleshooting for Checkation Tasks
to communicate via wireless and Action at NG.
LAN. Moreover, when wireless security is set to "WEP", the
connection to wireless LAN access point might not be able to
be communicated though does. Set it to the security setting of
wireless LAN access point additionally again.
44871001TH Rev.6
Confirmation Tasks Action at NG
Set Wireless setting by
Manual Setup or Auto
Setup (WPS) to connect
to wireless access
point.
Network Connection
setting switches from
Wired to Wireless.
*1
The settings of SSID,
the security setting,
the encryption key, and
the certificate, etc. are
insufficient. Please set
all necessary settings.
*1 : Check once again whether the SSID, security setting, and an encrypting key of the wireless LAN
access point are same as the settings of this device. When any one of settings is different, the device
cannot be connected to the wireless LAN access point.
Check that a WEP key index of the wireless LAN access point is 1 when the security settings of the
wireless LAN access point are WEP . When a WEP key index of the wireless LAN access point is not 1,
it can not communicate with this device.
When a time-out error is displayed after automatic setting (WPS-PBC/PIN) execution, the connection
setting with the wireless LAN access point is not completed in time.
Start WPS of the wireless LAN access point as soon as you start WPS of this device. (It is no problem
that you start WPS of the wireless LAN access point first. )
When an overlap error is displayed after automatic setting (WPS-PBC) execution, there is a device
carrying out WPS in others. Carry out WPS again after a while.
8. TROUBLESHOOTING PROCEDURES
8-72