Maintenance Utility - Oki MB461 Maintenance Manual

Oki Data CONFIDENTIAL
Option Adjustment
11 Password Initializes a Password.
initialization
12 Network Stores a network log file.
log storage
function
13 PU log file Stores a PU log file
storage
function
14 Saves a PU Saves a PU maintenance log file.
maintenance
log file
15 Consumable Checks the current consumable
counter counter values.
display
16 Menu setting Displays the menu settings set on the
check printer (CU).
17 Printer Checks the MAC address and each
information firmware version.
check
18 CPU and Checks the information on the printer's
installed (CU) CPU and memory.
Memory
value check
19 Test print Executes the local print function and
sends a specified file.
Purpose: To check the printer for
operation it performs solely and send
a download file.
20 Saves a Saves a local print data.
local print
data
21 Switch scan Executes the switch scan test.
test Purpose: To check each sensor for
operation.
22 Motor clutch Executes the motor clutch test.
test Purpose: To check each item, such as
a motor or clutch, for operation.
44871001TH Rev.6
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.2.2.13
2.4.2.2.14 Unavailable
2.4.2.2.16 Unavailable
2.4.1.2.17 Unavailable
2.4.1.3.1 6.4.2.6
2.4.1.3.2 Print a configuration
report (Menu
Map) (refer to user
documentation).
2.4.1.3.3 Print a configuration
report (Menu
Map) (refer to user
documentation).
2.4.1.3.4 Print a configuration
report (Menu
Map) (refer to user
documentation).
2.4.1.4.1 Perform local
printing (refer
to System
Specification).
2.4.2.4.2 Unavailable
2.4.1.5.1 6.4.2.3
2.4.1.5.2 6.4.2.4
Option Adjustment
23 Counter Checks the consumable, continuous
display consumable and waste toner counters.
24 Local Switches between the Factory and
parameter Shipping modes and checks the status
setting of the fuse.
25 Engine Makes an engine parameter setting.
parameter
setting
26 Media Makes a print media transfer
transfer parameter setting.
parameter
setting
Note! Do not operate or set options added with 'Never use this option,' or a
malfunction is potentially caused.
Before starting the maintenance, please disable MPS mode setting when the
unit activate MPS mode as Enable. The condition of MPS mode is displayed
on the header of Configuration pages as "MPS : OFF/ON".
6. MAINTENANCE MENUS
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.1.5.6 6.4.2.6
6.4.2.7
2.4.1.5.7 6.4.2.8
2.4.1.5.8 6.4.2.9
2.4.1.5.9 6.4.2.9
6-12