Pattern Selector Dial; Zigzag Width Control; Stitch Length Control; Variable Needle Position - Janome HD-3000BE Instruction Book

Pattern Selector Dial

Select the pattern by turning the pattern selector dial
and the red signal shows the selected pattern.
*Raise the needle above the fabrics and presser foot
when you turn the pattern selector dial.

Zigzag Width Control

Higher the number, wider the stitch width.
This machine will sew the maximum 6.5mm (0.25˝)
wide zigzag.
*Raise the needle above the fabrics when you set the
stitch width.

Stitch Length Control

The higher the number, the longer the stitch length.
You can select the suitable stitch length for fabrics
that you plan to sew.
NOTE:
Stitch length is automatically set for stretch stitch
pattern on pattern number 14 to 18.

Variable Needle Position

When pattern number 13 is selected, you can move
the needle between center and left needle positions.
17