Functional Description
14. PTZ Trace
▶ Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Main Menu
Tilt, Zoom and Focus) are memorized and replayed.
① Camera Setting
Replay :
② Sequence Setting
③ P/T Setting
Replays a route saved by the Trace function. Use the Stop
④ OSD Setting
button to stop the replay.
⑤ Alarm Setting
Memorize :
⑥ Initialize
Up to 120 seconds of a memory can be saved. The memory
Status
duration varies depending on the difficulty level of the PTZ
➡
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
Sequence Setting
terminated.
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On Resume
ON
MD Dwell Time
OFF
➡
PTZ Trace
① Trace 1
② Trace 2
③ Trace 3
④ Trace 4
➡
PTZ Trace 1
Replay
Memorize
66
SPEED DOME CAMERA
User's Manual
Functional Description
15. Auto Run
▶ Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a certain time,
Main Menu
the sequence operation designated by the user will be
① Camera Setting
executed.
② Sequence Setting
Mode :
③ P/T Setting
④ OSD Setting
- Home : Auto run Home Position (Refet to the Preset
⑤ Alarm Setting
Menu.)
⑥ Initialize
- Preset : Auto run a selected preset number.
Status
- Swing : Auto run a selected Swing mode.
- Group : Auto run a selected Group mode.
➡
- Tour : Auto run a selected Tour mode.
Sequence Setting
- Trace : Auto run a selected trace mode.
① Preset
- A.Pan : Auto run a 360-degree pan. To activate the
② Swing SEQ
panning command, you need to set up the
③ Group SEQ
camera's tilt angle and auto pan speed manually.
④ Tour SEQ
Time :
⑤ PTZ Trace
Enables setting up an Auto Run duration. (The duration can
⑥ Auto Run
be 1~60 seconds, or 1~60 minutes.)
Power On Resume
ON
MD Dwell Time
OFF
➡
Auto Run
Mode
OFF
Time
30 SEC
SPEED DOME CAMERA
67
User's Manual