Table of Contents
Advertisement
Functional Description
26.1 Setting Fan Life
▶ Main Menu/Initialize/Fan Life
Message Display :
Main Menu
The following alert message appears 2 months before the
① Camera Setting
fan lifespan expires: Fan Life was Expired. Replace the Fans.
② Sequence Setting
"Fan life Expired., Replace the Fans"
③ P/T Setting
-ON : Displays alert messages. (Default Option)
④ OSD Setting
-Off : Hides alert messages.
⑤ Alarm Setting
✽ The [Off] option does not automatically delete the messages
⑥ Initialize
but keeps them hidden from the screen. To show the
Status
messages again, change it back to [On]. (Displays only
➡
messages that are not deleted by [Message Clear].)
Initialize
Message Clear :
Deletes alert messages from the screen.
① Power On Reset
✽ [Cleared] messages do not display on the screen when the
② Factory Default
display option changes back to [On].
③ Camera Default
Auto Refresh
OFF
Time Reset :
⑤ Auto Track Default
Resets and starts counting the lifespan of a fan when it is
⑥ Fan Life
replaced.
(The Reset function activates only after the fan lifespan
➡
alert message is active.)
Fan Life
✽ This function counts the lifespan of a fan only during its
operation; it may be used longer than the expiration date
Message Display
ON
displayed on the OSD.
② Message Clear
Time Remain.(hour) :
③ Time Reset
- 49000 : Indicates the remaining lifespan of the current
Time Remain.(hour) 49000
fan. (Unit: hours)
- The remaining time refreshes when the [Fan Life] menu is
selected and the [Enter] key is pressed in the [Time Remain
(hour)] option.
84
SPEED DOME CAMERA
User's Manual
Functional Description
Status
27. Status
▶ Main Menu/Status
Displays the settings and version of the dome camera.
Main Menu
Cam Model :
① Camera Setting
② Sequence Setting
Indicates the model name of the camera.
③ P/T Setting
Cam Version :
④ OSD Setting
Indicates the software version of the camera.
⑤ Alarm Setting
Dome Version :
⑥ Initialize
Indicates the version of the camera control board.
Status
CON Protocol :
➡
Indicates the status of the current protocol.
Dome ID :
Camera Status
Dome Camera ID
CAM MODEL
= 37NHU
Controller :
CAM VERSION = 3.8
Indicates the settings of the current communications mode.
DOME VERSION = 1.16
Track Version :
CON PROTOCOL = SAMSUNG TW
Indicates the Auto Track software version of the camera.
DOME ID
= 001
COAX VERSION :
CONTROLLER
= Simplex-9600
Indicates the software version of the Coax communication
TRACK VERSION = 1.08
COAX VERSION = 1.04
SPEED DOME CAMERA
85
User's Manual
Hide quick links:
Advertisement
Table of Contents
