Installing Your Camera
Notes
• D onotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
Parapet Mount (STB-355PPM)
36
SPEED DOME CAMERA
User's Manual
Setup Box (STB-270B)
Installing Your Camera
On-wall Mount Type Installation Example
• How to Set Up Install Base
1. Open Hinged Door
As shown in the picture below, gently
press and lift up the handle of the
hinged door on the bottom of the
install base.
2. Connect Terminal Wires
Connect each wire to the pertinent
terminal block.
For more detailed instructions, please
refer to the "Camera Wiring Diagram"
on Page 20.
Once all the wires are connected, close
the hinged door.
벽부형 브라켓(STB-300PW)
Notes
• M akesuretofirsthookthecamera'ssafetycabletothemountbeforeproceeding.
Otherwise you may be exposed to serious injury caused by a fallen camera.
SPEED DOME CAMERA
Knob
Power Line
Control Line
Video Out Line
천장형 브라켓(STB-300PP)
37
User's Manual