Functional Description
13. Tour SEQ
▶ Main Menu/Sequence Setting/Tour SEQ
Selecting Tour SEQ recalls groups of preset locations in a
Main Menu
consecutive manner. Up to 6 groups can be listed for this
① Camera Setting
function.
② Sequence Setting
Settings :
③ P/T Setting
④ OSD Setting
Selecting the Settings menu brings up the following screen.
⑤ Alarm Setting
Using the joystick, you can enter desired group numbers to
⑥ Initialize
the Group section. DWT indicates the camera's standby
Status
time before a new group is recalled.
➡
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On Resume
ON
MD Dwell Time
OFF
➡
Execute :
Executes the group operation.
Tour SEQ
Clear :
Setting
Deletes the selected group.
Execute
Clear
56
SPEED DOME CAMERA
Tour SEQ
NO
Group
DWT(s)
01:
*
003
02:
*
003
03:
*
003
04:
*
003
05:
*
003
06:
*
003
User's Manual
Functional Description
14. PTZ Trace
▶ Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Main Menu
Tilt, Zoom and Focus) are memorized and replayed.
① Camera Setting
Replay :
② Sequence Setting
③ P/T Setting
Replays a route saved by the Trace function. Use the Stop
④ OSD Setting
button to stop the replay.
⑤ Alarm Setting
Memorize :
⑥ Initialize
Up to 120 seconds of a memory can be saved. The memory
Status
duration varies depending on the difficulty level of the PTZ
➡
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
Sequence Setting
terminated.
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On Resume
ON
MD Dwell Time
OFF
➡
PTZ Trace
① Trace 1
② Trace 2
③ Trace 3
④ Trace 4
➡
PTZ Trace 1
Replay
Memorize
SPEED DOME CAMERA
57
User's Manual