Tour Seq; Ptz Trace - Samsung SPD-3750 User Manual

Functional Description

13. Tour SEQ

▶ Main Menu/Sequence Setting/Tour SEQ
Main Menu
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
 Status
➡
Sequence Setting
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ

⑤ PTZ Trace

⑥ Auto Run
 Power On Resume
ON
 MD Dwell Time OFF
➡
Tour SEQ
 Setting
 Execute
 Clear
SPEED DOME CAMERA
More user manuals on
ManualsBase.com
Selecting Tour SEQ recalls groups of preset locations in a
consecutive manner. Up to 6 groups can be listed for this
function.
Settings :
Selecting the Settings menu brings up the following screen.
Using the joystick, you can enter desired group numbers to
the Group section. DWT indicates the camera's standby
time before a new group is recalled.
Tour SEQ
NO Group DWT(s)
01: * 003
02: * 003
03: * 003
04: * 003
05: * 003
06: * 003
Execute :
Executes the group operation.
Clear :
Deletes the selected group.
56
User's Manual
Functional Description
14. PTZ Trace
▶ Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Main Menu
Tilt, Zoom and Focus) are memorized and replayed.
① Camera Setting
Replay :
② Sequence Setting
③ P/T Setting
Replays a route saved by the Trace function. Use the Stop
④ OSD Setting
button to stop the replay.
⑤ Alarm Setting
Memorize :
⑥ Initialize
Up to 120 seconds of a memory can be saved. The memory
 Status
duration varies depending on the difficulty level of the PTZ
➡
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
Sequence Setting
terminated.
① Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
 Power On Resume ON
 MD Dwell Time OFF
➡
PTZ Trace
① Trace 1
② Trace 2
③ Trace 3
④ Trace 4
➡
PTZ Trace 1
 Replay
 Memorize
SPEED DOME CAMERA
57
User's Manual