Auto Track 1 (Spu-3750T Only) - Samsung SPU-3750T User Manual

Functional Description

22. Auto Track 1 (SPU-3750T Only)

▶ Main Menu/P/T Setting/Auto Track1
This commands the camera to automatically follow a moving
Main Menu
object or a person on the screen.
① Camera Setting
② Sequence Setting Auto Track :
③ P/T Setting
On/Off : Turns Auto Track on or off.
④ OSD Setting
Camera Height :
⑤ Alarm Setting
Adjusts the height of the camera. Tracking performance
⑥ Initialize
may decrease if the camera height is not adjusted properly.
 Status
(Height: 2.5m ~ 30m)
➡
Object Size :
P/T Setting
Sets a maximum zoom ratio to zoom in on an object if the
Zoom function is used for the tracking operation.
① Pan/Tilt Limit
- Small : Zooms in on a tracking object up to 1/4 of the
② Area Setting
screen height.
③ Area Masking
 Prop. P/T - Medium : Zooms in on a tracking object up to 2/4 of the
ON
 Digital Flip ON
 Image Hold
OFF - Large : Zooms in on a tracking object up to 3/4 of the
⑦ Auto Track1 screen height.
⑧ Auto Track2
Sensitivity :
➡
The object detection sensitivity is adjustable. Lower the
sensitivity if the camera catches a swaying tree branch,
Auto Track 1
raindrops, or snowflakes during the Auto Track operation.
 Auto Track OFF
Zoom Control :
 Camera Height
02.5M
The function's zoom control settings are as follows.
 Object Size SMALL
- Off : Disables the Zoom control.
 Sensitivity
HIGH
- One Shot : Performs the Zoom control once during the
 Zoom Control OFF
 Auto Release OFF
 Auto Return OFF
 Lost Mode STOP
- Continuous : Performs the Zoom control continuously.
74
SPEED DOME CAMERA
screen height.
Motion Detection and Auto Track operations.
Depending on the movement detection, the
camera performs the Zoom control multiple
times.
User's Manual
Functional Description
Auto Release :
Enables setting a maximum duration to follow an object. When the duration expires, the camera
stops following the object and returns to the start position to follow another objects.
Auto Return :
- Off : Commands the camera to stay on the location the last object stopped at instead of
returning to the initial position.
- Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and
then return to the start position.
Lost Mode :
Sets up an action for the camera in case the object it is following goes out of the detection
range.
- Stop : Commands the camera to stop and abort tracking at the spot where its object
disappeared.
- Research : Commands the camera to stop and standby at the spot where its object
disappeared.
- Zoom-Out : Commands the camera to zoom out and look for a new object in case its current
object disappears.
75
SPEED DOME CAMERA User's Manual