Functional Description
4. Backlight
4.1 Backlight Mode Settings
▶ Main Menu/Camera Setting/Back Light
Unlike other cameras, Samsung Techwin's unique SV-IV DSP
Main Menu
chip(SPU-3750T) / W-IV DSP chip(SPU-3700) gives you a clear
① Camera Setting
image of the subject even with bright backlight.
② Sequence Setting
Back Light Mode :
③ P/T Setting
- Off : Disables the Backlight mode.
④ OSD Setting
- WDR : Activates the Wide Dynamic Range mode.
⑤ Alarm Setting
- HLC : Activates the High Light Compensation mode.
⑥ Initialize
- BLC : Activates a user defined backlight compensation
Status
mode.
➡
Camera Setting
① Focus & Zoom
White Balance
ATW
③ Exposure
④ Back Light
OFF
AGC
Medium
SSNR
Medium
⑦ Day & Night
⑧ Others
50
SPEED DOME CAMERA
User's Manual
Functional Description
4.2 WDR(SPU-3750T Only)
▶ Main Menu/Camera Setting/Back Light/WDR
When there are both bright and dark areas at the same time,
Main Menu
this mode makes both areas distinctive.
① Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize
Status
➡
WDR ON
Camera Setting
① Focus & Zoom
Limit :
White Balance
ATW
Three WDR sensitivity levels are available in 3: Low,
③ Exposure
Medium , and High.
④ Back Light
WDR
Note that the higher the sensitivity level, the lower the
AGC
Medium
contrast in the light and dark areas becomes.
SSNR
Medium
Level :
⑦ Day & Night
⑧ Others
Adjusts the screen brightness in WDR mode.
➡
WDR Setting
Limit
Medium
Level
50
Notes
• W DRisdisablediftheshutterisinManualmode.
• D uringWDRoperation,noise,discoloration,spots,and
whitish symptoms may occur depending on lighting
conditions. If they occur, stop using WDR.
SPEED DOME CAMERA
WDR Off
51
User's Manual