Table of Contents
Advertisement
6.3.5. PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan, Tilt,
Zoom and Focus) are memorized and replayed.
Note
Memorize: Manual operations for minimum 120 seconds after
executing this function are memorized into the internal memory.
Nevertheless, the memorizing time becomes different depending
on the PTZ operation. OVER mark will finish this function.
Note
6.3.6. Auto Run
If there is no operation by the user for a certain time, the sequence
operation designated by the user will be executed.
Mode:
- OFF : Auto Run will be cancelled.
- Preset : Auto Run in the corresponding Preset number
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, please note that other operations
beyond the limited operation range are not possible.
If the operation range is limited using ①Pan Limit
and ②Tilt Limit, only the operations within the limited
range are memorized.
6.3. Sequence Setting
113
Advertisement
Table of Contents
