Installation Options; Features; Heating Specifications; Dimensions - Lopi Spirit B-Vent Gas Stove Owner's Manual

Installation Options:

¥ Freestanding

Heating Specifications:

Approximate Heating Capacity (in square feet)*
AFUE (Annual Fuel Utilization Efficiency)
High Burn Input Rate (In BTU's)
Low Burn Input Rate (In BTU's)
Efficiency**
* Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system.
To measure the net BTU's, multiply the BTU input by the efficiency percentage (80% for natural gas, 82% for LP).

Dimensions

The base of the starter
section is 4-3/4" below
the upper top.
Measure
clearances to
the upper top

Fuel:

Emissions:

Electrical Specifications:

F
EATURES AND

Features:

¥ Works During Power Outages
(millivolt system)
¥ High Efficiency; Up to 80% for Natural Gas,
82% for LP (Steady State)
¥ Optional Thermostat or Remote Control
¥ Realistic "Wood Fire" Look
¥ Convenient Operating Controls
¥ Variable-Rate Heat Output
¥ Quiet Blower for Effective Heat Distribution
¥ Low Maintenance
24"
Vent Dia. 4"
4-7/8"
18-3/4"
The heater is designed either for natural gas or for propane (but not
for both). Check the sticker on the top of the gas control valve.
This unit has passed the ANSI emission standards for vented room
heaters as tested by OMNI Environmental Services, Inc.
115 Volts, 1.3 Amps, 60 Hz (150 watts on high)
S
PECIFICATIONS
600 - 1600
68 %
Natural Gas LP (Propane)
40,000
23,000
80%
Weight: 205 Lbs.
Pedestal: 34-7/8"
Brass, Cast Legs: 30-7/8"
Black Legs: 29-1/2"
P 5
AGE
38,000
20,000
82%