Specifications; Installation Options; Features; Heating Specifications - Lopi Spirit DV EF Manual

Direct vent freestanding stove
Table of Contents

Advertisement

Installation Options:

Freestanding Stove
Residential or Mobile Home
Horizontal or Vertical Vent

Heating Specifications:

Approximate Heating Capacity (in square feet)*....................................600 to 1,600
Maximum BTU Input Per Hour.............................................................38,500 NG
BTU Input on Low..............................................................................18,700 NG
Efficiency .......................................................................................81 % NG
AFUE................................................................................................72.4% NG
*
Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature.
* *
Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent
of installed system. To measure the net BTU's, multiply the BTU input by the efficiency percentage.

Dimensions

The starter section
is 4-1/8" below the
upper top.
Measure Clearances
from the Upper Top

Fuel:

This heater is shipped in natural gas (NG) configuration but may be converted to propane (LP) using
the included LP conversion kit. The sticker on top of the gas control valve will verify the correct fuel.

Electrical Specifications

Electrical Rating (with optional blower)......................115 Volts, 0.8 Amps, 60 Hz (92 watts on high)
Travis Industries

Specifications

Features:

24"
4-7/8"
18-3/4"
4041220
Ember Fyre ™ Burner for "Wood Fire" Look
Works During Power Outages
Variable-Rate Heat Output
Optional Thermostat or Remote Control
Variable-Speed Blower
Weight: 205 Lbs.
Pedestal: 34-7/8"
Cast Legs: 30-7/8"
5
36,500 LP
18,000 LP
81.5 % LP
73 % LP
1 0 0 - 0 1 1 5 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents