Optional Equipment; Legs Installation; Pedestal Installation - Lopi Spirit B-Vent Gas Stove Owner's Manual

O
PTIONAL
P 24
AGE
Stove Leg Installation
Raise the stove 8" (use lumber or other sturdy device). Attach each leg following the instructions
below.
Attach each leg to the stove by
inserting a bolt and washer through the
hole or slot in the leg and into the
threaded hole on the stove.
These rubber-tipped bolts are for leveling the stove.
Make sure they contact the floor. Do not adjust
with weight on the legs, the rubber tips may tear.

Pedestal Installation

Use a 9/16" wrench to attach the two
pedestal bolts to the bottom of the stove.
9/16" Socket Wrench
The screen, insulation, and staples
are used for wood stoves - discard
these items.
E
QUIPMENT
(Brass # 99200500, Cast Black # 99200800, Black Steel # 99200100)
(Part # 99200106)
9/16" Socket Wrench
Stove
Pedestal
The lag bolts
and washers
may be inserted
through the
holes in the
base of the
pedestal to
anchor the
pedestal to the
floor.