Setting Language - Mercedes-Benz COMAND Operator's Manual

Stopping film or skipping to the
beginning/end of a scene
Select any menu item from the DVD
menu.
The selection menu appears.
To stop a film: Select the menu item
"Stop".
To skip to the end of the scene: Se-
lect the menu item r.
To skip to the beginning of the
scene: Select the menu item p.
i
Depending on the DVD, it is possible the
menu items p and r either have no func-
tion or no function in certain parts of the DVD
menu. This is indicated by the 7 symbol on the
display.
Switching to the next DVD menu up
Press the í button.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item "Go Up".
i
Depending on the DVD, it is possible the
menu item "Go Up" either has no function or no
function in certain parts of the DVD menu. This is
indicated by the 7 symbol on the display.
Back to movie
Press the í button repeatedly until
the film is shown.
or
Select the corresponding menu item
from the DVD menu.
or
Select any menu item from the DVD
menu.
In the selection menu select the menu
item "Back (to movie)".
i
Depending on the DVD, it is possible the
menu item "Back (to movie)" either has no func-
tion or no function in certain parts of the DVD
menu.

Setting language

i
The function is not available for all DVDs. If
it is available, you can set the DVD menu lan-
guage, the audio language or the audio format.
The number of settings is determined by the DVD
content. The settings may also be possible in the
DVD menu ( page 80).
In DVD video mode, if necessary dis-
play the menu system ( page 77).
Select "DVD-Video" "DVD Func-
K
tions".
Select "Audio Language".
A selection menu will appear after a
short time. The dotRin front of an en-
try indicates the currently selected lan-
guage.
To change setting: Rotate
qmr
slide until the desired setting is
reached.
To save setting: Press n.
To exit menu without changes: Slide
omp.
Video
DVD video
ymz
or
81