Mercedes-Benz COMAND Operator's Manual page 161

Navigation
Destination memory
Selecting memory options
Saving destination without name
Select "Save Without Name".
COMAND saves the destination in the
destination memory and uses the ad-
dress as the destination name.
or
Select "Save as My Address".
COMAND saves the destination under
the "My Address" entry in the destina-
tion memory.
If the entry already contains data that
support navigation, you will be prompt-
ed to confirm that you wish to over-
write the previous destination address.
Select "Yes" or "No".
If you select "Yes" the message "Saving
Procedure Successful" appears, select-
ing "No" cancels the operation.
Saving destination with name
Select "Save With Name".
Select desired category, e.g. "Home".
The input menu is displayed with the
data fields and the predictive speller.
160
1 Selected data field with cursor
2 Predictive speller
To enter data: Continue with the step
"Switching data field" ( page 105) in
the "Creating a new address book en-
try" section.
COMAND saves the destination under
the name entered.
Assigning destination to an address
book entry
i
This function assigns the complete address
data that support navigation to an existing ad-
dress book entry. You can then select this entry
in the address book and from there start naviga-
tion to the address.
Select "Assign to Address Book Entry".
Select the desired category, e.g.
"Home".
You will see either the list or, if there
are more than 8 address book entries,
the search menu with search speller.
Select the desired address book entry.
Proceed as described in the "Searching
for an address book entry" section
( page 106).
If the selected address book entry does
not yet contain any address data that
support navigation, COMAND saves
the data.
If the selected address book entry al-
ready contains address data that sup-
port navigation, you will be prompted
to confirm that you wish to overwrite
the existing data.
Select "Yes" or "No".
If you select "Yes" COMAND saves the
data.