Mercedes-Benz COMAND Operator's Manual page 50

ß
Press on the control unit.
To enter a channel: Press correspond-
ing number buttons on the control unit.
i
You can only select numbers that are cur-
rently permissible.
COMAND will tune to the channel en-
tered.
Selecting a channel from the SatRadio
channel list
Select "SatRadio" "Channel List" in
K
the SatRadio menu.
The channel list appears.
To select a channel: Rotate
slide qmr.
To tune to the selected channel:
Press n.
Memory functions
i
There are 10 presets available.
You can use the following functions:
Saving channels manually
Selecting a channel from the Satellite
preset memory ( page 50)
Storing channels manually
Press n if the display/selection win-
dow is highlighted.
or
Select "Presets" on the SatRadio sub-
menu bar.
ymz
or
In both cases, the channel memory will
appear. The dotRin front of a preset
indicates that the currently tuned chan-
nel is stored there.
Satellite radio*
Station memory
To select a preset: Rotate
slide qmr.
To store a channel to a selected pre-
set: Press and hold n until a signal
tone sounds.
or
Press and hold a number key, e.g.
until a signal tone sounds.
The channel is stored.
Audio
ymz
or
4
,
49