Mercedes-Benz COMAND Operator's Manual page 125

Navigation
Introduction
Time of arrival/distance to destination
Map with display activated for time of arriv-
al/distance
1 Symbol for destination
2 Distance to the destination
3 Symbol for estimated time of arrival
4 Estimated time of arrival
i
This display can only be seen during route
guidance. In the "Move map" function you will
see other data depending on the crosshairs posi-
tion, for example a street name if the digital map
supports this data.
124
Current street
Map with road display activated
1 Road name or road number, e.g. for
highways
Geo-coordinates display
Map with geo-coordinates display activated
1 Current height above sea level (round-
ed off to 50 m)
2 Coordinates display of the current vehi-
cle location (latitude)
3 Coordinates display of the current vehi-
cle location (longitude)
4 Number of GPS satellites currently be-
ing used
i
Adequate GPS reception must be available
for all displays. The altitude display 1 may differ
from reality because the navigation system cal-
culates it using the GPS signals.
i
In the "Move map" function the displays 1
and 4 are not displayed. The geo-coordinate
position of the crosshairs is displayed.
"None" menu option
Map with display switched off
1 Currently set map orientation
i
In the "Move map" function you will see oth-
er data depending on the crosshairs position, for
example a road name if the digital map supports
this data.