Mercedes-Benz COMAND Operator's Manual page 131

Navigation
Destination input
When entering a digit, the list entry 3 al-
ways displays a zip code that best matches
the characters already entered. COMAND
automatically adds matching digits 2 to
those digits 1 already entered by the us-
er.
For the steps of
Entering characters
Deleting an entry
Accepting first list entry
Cancelling an entry
Switching to the list without predic-
tive speller
proceed as described under "City list with
predictive speller" ( page 127).
or
If COMAND can match the characters en-
tered definitively to one city, the Enter
Destination menu appears automatically
with the selected list entry.
130
Switching to the zip code list without
predictive speller
You can switch to the list at any point while
entering characters.
Slide qm repeatedly until the list ap-
pears without the speller.
or
Select B and press n.
ZIP code list without predictive speller
To select a zip code: Rotate
slide qmr.
To cancel selection: Select "Back"
and press n.
or
Press the í button.
To confirm selection: Press n.
If COMAND can assign the zip code to
a unique address, the Enter Destination
menu is displayed again. The address
data has been entered automatically.
Now you can start the route calculation
( page 135).
If COMAND is unable to assign the zip
code to a unique address, the Enter
Destination menu is also displayed
again. The zip code has been entered
automatically. To further limit the
choice, you can now enter the street
( page 131). When entering the
street, only those streets within the
area of the entered zip code are avail-
able.
ymz
or