Resetting The Smart View Display - Taylor-Dunn B0-T48-48 Taylor Truck T48 Operation Manual

ITEM #
1 95-913-00 Hole Plug (Not Shown)
2 71-039-11 Switch
74-009-48 Battery Status Indicator (Curtis 900)
3
74-010-00 Smart View display
4 01-200-09 Console
5 71-039-02 Forward & Reverse Switch
6 71-120-10 Key Switch
- 71-119-99 Key Switch Spacer (Not Shown)
7 71-120-90 Key
8 71-501-00 Horn Button
9 94-304-13 Instrument Panel
10 88-817-07 #8 X 1/2", Phillips Oval Head Tapping (# 6 Head)
- 74-000-00 Hour Meter (optional)
- 71-100-00 Accessory Toggle Switch (Optional Not Shown)
NOTE: If your vehicle was not originally equipped with the Smart View display, then the Sevcon
speed control must be reprogrammed before the display will function.
If you have the Smart View display and wish to have the maintenance feature turned on,
then the Sevcon speed control must be reprogrammed.
To reprogram the Sevcon speed control, the speed control must be returned to the factory.
Contact your local Taylor-Dunn
The Smart View Display will only work with the Sevcon control system.

Resetting the Smart View Display

The meter should only be reset after the preventative maintenance has been performed. Taylor-
Dunn part number 62-027-40 Hand set (available with instructions as part number 62-027-61) must
®
be used to reset the meter. Refer to the handset instructions (D0-100-08) for information on the proce-
dure to reset the display.
INSTRUMENT PANEL
PART #
distributor for more information.
®
SECTION 5
DESCRIPTION
PAGE 27
MB-T48-01
QTY
2
1
1
1
1
1
1
1
1
1
1
8
1
1