Figure 38-3 Applying Schedule Set(S) To A Remote Node (Pppoe) - ZyXEL Communications ZyWALL 5 User Manual

FIELD
Action Forced On means that the connection is maintained whether or not there is a
demand call on the line and will persist for the time period specified in the
Duration field.
Forced Down means that the connection is blocked whether or not there is a
demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call on
the line.
Disable Dial-On-Demand means that this schedule prevents a demand call
on the line.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save your
configuration, or press [ESC] at any time to cancel.
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter
11 from the Main Menu and then enter the target remote node index. Press [SPACE BAR] and then
[ENTER] to select PPPoE in the Encapsulation field to make the schedule sets field available as
shown next.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPPoE
Service Type= Standard
Service Name=
Outgoing=
My Login=
My Password= ********
Authen= CHAP/PAP

Figure 38-3 Applying Schedule Set(s) to a Remote Node (PPPoE)

You can apply up to four schedule sets, separated by commas, for one remote node. Change the
schedule set numbers to your preference(s).
Call Scheduling
Table 38-1 Schedule Set Setup
DESCRIPTION
Menu 11.1 - Remote Node Profile
Route= IP
Edit IP= No
Telco Option:
Allocated Budget(min)= 0
Period(hr)= 0
Schedules= 1,2,3,4
Nailed-Up Connection= No
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= 100
Edit Traffic Redirect= No
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 5 Internet Security Appliance
Apply your schedule
sets here.
OPTIONS
Forced On
Forced
Down
Enable Dial-
On-Demand
Disable Dial-
On-Demand
38-3