Ele To Camber - FUTABA T18MZ FASSTest-2.4GHz Instruction Manual

ELE to Camber

This function is used when you want to mix
the camber flaps with elevator operation. When
mixing is used so that the flaps are lowered by up
elevator , lift can be increased.
● Touch the [ELE to Camber] button in the Model
Menu to call the setup screen shown below.
● Curve display mode switching
(Single/Fine tuning/All Cond.)
ELE to Camber
ACT
INH
OFF
Switch
Display Single
Fine Tuning
+
NULL
● Fine tuning VR setting
ELE to Camber
Rate 1
Rate 2
Rate 1
Rate 2
Setting method
● Touch the ACT button and set the function to
ACT(ON).
● When setting a switch, touch the [ON] button of
the switch to call the <Switch> screen, and then
select the switch and set its ON direction. (Always
ON at "ON" setting.)
● When setting a VR, touch the Fine tuning "NULL"
button to call the <Switch> screen, and then
select the VR. The adjustment rate and adjustment
direction can be set.
The VR operation mode can also be selected.
[Corresponding model type]: Airplane/glider, 2 ailerons or more
● Return to Model Menu
Model 1
POS RATE
+0.0%
Gr. +150
+100
+50
+0
-50
0%
-100
( +0%)
-150
● Mixing curve setting
Model 1
AIL3 AIL AIL2
+0% +0% +0%
( +0% ) ( +0% ) ( +0% )
+0% +0% +0%
( +0% ) ( +0% ) ( +0% )
FLP3 FLP FLP2
+0% +0% +0%
( +0% ) ( +0% ) ( +0% )
+0% +0% +0%
( +0% ) ( +0% ) ( +0% )
(Ailerons and flaps rate adjustment screen)
● A mixing curve can be set.
● Mixing during flight can be turned ON/OFF by
setting a switch. (Always ON at "ON"setting)
● The mixing rate can be fine-tuned by setting a VR.
● Group/single mode switching
(Gr./Sngl)
Condition 1
1/2
85%
+0.0%
Linear Separate
Rate A Rate B
+100.0% +100.0%
Offset
+0.0%
Condition 1
2/2
85%
AIL4
+0%
( +0% )
+0%
( +0% )
FLP4
+0%
( +0% )
+0%
( +0% )
● A mixing curve can also be set.
● The curve display mode can be changed.
Single : Displays the mixing curve only
Fine tuning : Displays the fine tuning VR adjustment
rate
All Cond. : Displays the mixing curve of all the
conditions (When conditions are set)
<Model Menu (Airplane/Glider Functions)>
● Overall
adjustment by
Rate A and
Rate B
121