Camber昀氀Ap→Ele - FUTABA 16IZS Full Manual

Camber 昀氀ap → ELE
This mixing is used to correct changes (elevator
direction) generated when the camber 昀氀aps (speed
昀氀aps) are used.
● The elevator servos up side/down side rate can be
adjusted. When the mixing direction is reversed
by the linkage, adjustments can be made by
changing the mixing rate polarity (+ or –).
● A mixing curve can be set.
● Mixing during 昀氀ight can be turned ON/OFF by
setting a switch. (Always ON at [--] setting)
● The mixing rate can be 昀椀ne-tuned by setting a VR.
● Select [Camber flap→ELE] at the model
menu and call the setup screen shown
below.
●Return to Model menu
● Mixing curve setting
(For a description of the
setting method, see the
description at the back
of this manual.)
Activate the function by
tapping the [INH].
Condition group/single
mode selection (Gr. /Sngl)
The ON/OFF switch of
mixing is chosen.
Setting method
● Tap [INH].
(ON is displayed.)
● When setting a switch, tap to the [--] item
of the switch and tap the screen to call the
selection screen. Then, select the switch and
set its ON direction. (Always ON at "--" setting)
(For a description of the switch selection
method, see the description at the back of
this manual.)
● Tap elevator servos. Adjust the mixing rate.
[Corresponding model type]: Airplane/
glider, 2 ailerons + 1 昀氀ap or more
Currently selected condition name
Camber flap → ELE
Camber flap → ELE
*When the mixing direction is reversed by the linkage,
● When setting a VR, tap the Fine tuning "--"
● A mixing curve can be set.
137
FLP 1
(Camber Flap) (Camber Flap)
AILVATOR
V-TAIL
ELEVATOR
ELEVATOR
ELEVATOR 2
Up/Down overall
adjustment at Rate A
and Rate B
adjustments can be made by changing the mixing rate
polarity (+ or –).
item and tap the screen to call the selection
screen, and then select the VR. The VR
operation mode can be selected.
(For a description of the curve setting
method, see the description at the back of
this manual.)
→
GO to TABLE OF CONTENTS
FLP 2
ELEVATOR 2
Adjustment of
elevator servo
Fine tuning
setting