Text Memory - Yaesu FT-991 Operating Manual

TEXT Memory

The five channels of CW message memory (up to 50 characters each) may also be programmed using a text-entry tech-
nique. This technique is somewhat slower than sending message directly from the keyer paddle, but accuracy of charac-
ter spacing is ensured. Be sure to enter the character "}" at the end of the text message.
Example 1: CQ CQ CQ DE W6DXC K} (20 characters)
The sequential Contest Number ("Count up") feature is another powerful feature of the CW Memory Keyer.
Example 2: 599 10 200 # K} (15 characters)
t M S
ext eMory torAge
1. Press the MENU(SETUP) button to enter the Menu
mode.
2. Rotate the MULTI knob to select the CW Memory
Register into which you wish to store the message;
we are now setting the message entry technique to
(Text entry).
018 CW MEMORY 1
019 CW MEMORY 2
020 CW MEMORY 3
021 CW MEMORY 4
022 CW MEMORY 5
A :
dvice
The following texts are programmed to the MEM-
ORY 4 and MEMORY 5 in factory default.
MEMORY 4: DE FT-991 K}
MEMORY 5: R 5NN K}
3. Touch [ SELECT ] on the LCD, then rotate the
MULTI knob to set the selected CW Memory Regis-
ter to "TEXT". If you want to use text message entry
on all memories, set all five Menu items (#018 - 022)
to "TEXT".
4. Touch [ ENTER ] on the LCD to save the new set-
ting.
5. Press the MENU(SETUP) button or touch [ BACK ]
on the LCD to exit to normal operation.
TEXT CW CODE TEXT
! SN
" AF
#
$ SX
% KA
FT-991 O
peraTing
cw c
c
onteSt
CW CODE TEXT CW CODE
& AS + AR
´ WG , MIM
( KN - DU
) KK . AAA
＊
/ DN
M
anual
onvenience
M k
eMory eyer
TEXT CW CODE TEXT
:
OS ?
; KR @
<
￥ （＼）
= BT
>
f
eatures
MENU(SETUP) Button
MULTI Knob
CW CODE TEXT CW CODE
IMI ^
@ _ IQ
[ }
AL
}
Page 87