Memory Groups; Memory Group Assignment - Yaesu FT-991 Operating Manual

M o
eMorY
Memory channels may be arranged into as many as six convenient groups, for easy identification and selection. For ex-
ample, different memory groups may be designated for AM BC stations, short-wave broadcast stations, contest frequen-
cies, repeater frequencies, PMS limits, or any other groupings you might like.
Each memory group is capable of holding up to 20 memory channels (except Memory Group 01 is 19 memory chan-
nels, and the Group size is fixed).

Memory Group Assignment

1. Press the MENU(SETUP) button to enter the Menu
mode.
2. Rotate the MULTI knob to select Menu item "034
MEM GROUP".
3. Touch [ SELECT] on the LCD, then rotate the
MULTI knob to set this Menu item to "ENABLE" (the
default setting is "DISABLE").
4. Touch [ ENTER ] on the LCD to save the new set-
ting.
5. Press the MENU(SETUP) button or [ BACK ] on the
LCD to exit. Operation will now be restricted to the
six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (4) above, choosing "DISABLE" in step (3).
A :
dvice
To avoid confusion, note that the PMS memory group
and the PMS memories "P-1L" through "P-9U" will be
so designated.
Page 104
peration
M
eMory
g
roupS
MENU(SETUP ) Button
MULTI Knob
M
eMory
P-1L/1U - P-9L/9U
5M-01 - 5M-10
FT-991 O
c n
hAnnel uMber
01 - 19
20 - 39
40 - 59
60 - 79
80 - 99
M
peraTing anual