Yaesu FT-991 Operating Manual page 91

Without using the remote control keypad FH-2, you can also input the CW TEXT directly on the screen.
1. Press and hold the MENU(SETUP) button.
2. Touch [ CW TEXT ] on the LCD. The CW text
display screen will appear.
3. Rotate the MULTI knob to select the CW TEXT
you want to input, then touch [ EDIT ] . The text
input screen will appear.
4. Touch a key on the LCD to enter the letters, num-
bers, or symbols of the desired text.
FT-991 O
peraTing
cw c
c
onteSt
Inputting the CW TEXT directly on the screen
M
anual
onvenience
M k
eMory eyer
5. Repeat step 4 to program the remaining letters,
numbers, or symbols of the desired text. 12 char-
acters may be used in the creation of a text.
Use [  ] and [  ] on the LCD to set the cursor
position and [ ] on the LCD to erase a letter at
the left of the cursor.
6. When you have completed the creation of the
text, touch [ ENT ] on the LCD.
7. Press the MENU(SETUP) button to save the
new setting and return to normal operation.
f
eatures
MENU(SETUP) Button
MULTI Knob
Page 89