Recalling The Home Channel - Yaesu FT-991 Operating Manual

Recalling the Home Channel

1. Press the F(M-LIST) button, then touch [ HOME ]
on the LCD. The home channel frequency will be
shown in the display.
A :
dvice
Change the frequency using Main Tuning Dial knob
to return to the VFO mode.
Touch [ HOME ] again to return to the VFO mode and
display the frequency that was selected before the home
channel was recalled.
Changing the Frequency of the Home Channel
The default frequency setting of the home channel when shipped from the factory can be changed.
1. Press the F(M-LIST) button, then touch [ HOME ]
on the LCD. The home channel will be shown in the
display.
2. Press the BAND button, then touch [ ENT ] .
FT-991 O
peraTing
S M
tAndArd
M
anual
M
eMorY
o
eMory perAtion
A :
dvice
In the default setting, the Home channel frequencies of
each band are set as follows.
HF band: 2,960000 MHz
50 MHz band: 52,52500 MHz
144 MHz band: 146,52000 MHz
430 MHz band: 446,00000 MHz
BAND Button
3. Set the desired frequency, then touch [ ENT ] on the
LCD to exit to normal operation.
When the writing to the home channel is completed,
the updated home channel frequency will be dis-
played.
o
peration
F(M-LIST ) Button
F(M-LIST ) Button
Page 99