Text Memory - Yaesu FTDX5000 Series Operating Manual

CW C
ONVENIENCE

TEXT Memory

The four channels of CW message memory (up to 50 characters total) may also be programmed using the text-entry
technique. This is somewhat slower than sending the message directly from your keyer paddle, but accuracy of character
spacing is ensured. Example 1: CQ CQ CQ DE W6DXC K} (20 characters)
You may also utilize another powerful feature of the CW Memory Keyer, the sequential Contest Number ("Countup")
feature. Example 2: 599 10 200 # K} (15 characters)
S T M
TORING EXT INTO EMORY
1. Press the [ MENU ] button briefly, to enter the Menu
mode.
2. Rotate the ( VFO-A )[ SELECT ] knob to select the CW
Memory Register you wish to store the message in.
For now, you are just selecting the message entry tech-
nique (Text entry).
025 KEY CW MEM1
026 KEY CW MEM2
027 KEY CW MEM3
028 KEY CW MEM4
029 KEY CW MEM5
3. Rotate the ( VFO-B )[ SELECT ] knob to set the selected
TEXT TEXT
TEXT". If you want to use the TEXT
Memory Register to "TEXT
Text method for message entry on all memories, set all
five Menu items (#025 ~ 029) to "TEXT
4. Press and hold in the [ MENU ] button for two seconds
to save the new settings and exit.
Page 96
F
C M
ONTEST
TEXT". TEXT TEXT TEXT
( VFO-A )[ SELECT ] Knob
[ MENU ] Button ( VFO-B )[ SELECT ] Knob
EATURES
K
EMORY EYER
T M
EXT ESSAGE
1. Set the operating mode to CW.
2. Set the [ BK-IN ] button to "off".
3. Turn the internal Electronic Keyer "on" by briefly
pressing the [ KEYER ] button.
4. Press the FH-2's [ MEM ] key.
5. Press the [ 1 ] ~ [ 5 ] key on the FH-2 to
begin the memory storage process.
6. Use the FH-2's [  ] and [  ] keys to
set the cursor position and use the [  ]
and [  ] keys to choose the letter/num-
ber to be programmed in each slot of
the memory. In the case of the second
example above, the "#" character des-
ignates the slot where the Contest Num-
ber will appear.
A :
DVICE
You may set the cursor position with the ( VFO-
A )[ SELECT ] knob, and then choose the letter/num-
ber with the ( VFO-B )[ SELECT ] knob.
FT
DX
P
ROGRAMMING
CW Memory Register Number Message
Current Cursor Position
Select the cursor position Choose the letter/number
5000 O M
PERATING
LOCK
ON OFF
LOCK
ON OFF
LOCK
ON OFF
Cursor
ANUAL