Erasing Memory Channel Data - Yaesu FT-991 Operating Manual

Checking a Memory Channel Status
Before programming a channel into memory, you can check the current contents of that channel without the danger of
over-writing the channel accidentally.
1. Press the A M button momentarily.

The data stored in the currently selected memory
channel will be displayed on the TFT. However,
since you are only checking the contents of the
memory channel, the radio will not have moved to
the memory channel frequency.
2. Rotate the MULTI knob to select a different memory
channel. To exit from the Memory Check mode,
press the A M button momentarily once more.

A :
dvice
 While operating in the VFO mode, using Memory
Check, you may store the current VFO frequency
into the selected memory by pressing and holding
in the A M button for one second (until the double

beep).

Erasing Memory Channel Data

1. Press and hold in the F(M-LIST) button.
2. Rotate the MULTI knob to select the memory chan-
nel that you would like to erase.
3. Touch [ ERASE ] on the LCD.
FT-991 O
peraTing
S M
tAndArd
M
anual
M
eMorY
o
eMory perAtion
A :
dvice
 The FT-991 cannot erase memory channel "01" (and
channels "5-01" through "5-10": U.S. version).
 If you make a mistake and wish to restore the memo-
ry contents, just repeat steps (1) through (3) above.
o
peration
MULTI Knob A M Button

F(M-LIST ) Button
MULTI Knob
Page 101