Using The Gm Function; Rpt Shift 50Mhz; Radio Id; Digital Sql Type - Yaesu FT-991 Operating Manual

M M
enu oDe

081 RPT SHIFT 50MHz

Function: Sets the RPT offset frequency on the 50 MHz
band.
Available Values: 0 - 4000kHz (10kHz/step)
Default Setting: 1000kHz
Description: Sets the repeater offset frequency on the 50
MHz band.

082 RPT SHIFT 144MHz

Function: Sets the RPT offset frequency on the 144
MHz band.
Available Values: 0 - 4000kHz (10kHz/step)
Default Setting: 600kHz
Description: Sets the repeater offset frequency on the
144 MHz band.

083 RPT SHIFT 430MHz

Function: Sets the RPT offset frequency on the 430
MHz band.
Available Values: 0 - 10000kHz (10kHz/step)
Default Setting: 5000kHz
Description: Sets the repeater offset frequency on the
430 MHz band.

084 ARS 144MHz

Function: Sets the ARS function on the 144 MHz band.
Available Values: OFF/ON
Default Setting: ON
Description:
OFF:
Disables the ARS function.
ON:
Enables the ARS function.

085 ARS 430MHz

Function: Sets the ARS function on the 430 MHz band.
Available Values: OFF/ON
Default Setting: ON
Description:
OFF:
Disables the ARS function.
ON:
Enables the ARS function.

086 DCS POLARITY

Function: Selects the DCS code polarity.
Available Values: Tn-Rn/Tn-Riv/Tiv-Rn/Tiv-Riv
Default Setting: Tn-Rn
Description: When using the DCS function, the trans-
ceiver can transmit/receive the DCS code with the
phase reversed.
Tn-Rn:
Transmit (in phase), receive (in phase)
Tn-Riv:
Transmit (in phase), receive (reverse phase)
Tiv-Rn:
Transmit (reverse phase), receive (in phase)
Tiv-Riv:
Transmit (reverse phase), receive (reverse phase)
Page 132

087 RADIO ID

Function: Displays the unique transceiver ID assigned at
the time of shipment (5-digit alphanumeric charac-
ters).
Available Values: Cannot be changed.
Default Setting: Differs depending on the transceiver.

088 DIGITAL SQL TYPE

Function: Sets the squelch type in digital mode.
Available Values: OFF/CODE/BREAK
Default Setting: OFF
Description: Selects the squelch type in digital mode.
OFF:
Outputs the audio whenever the transceiver
receives a digital signal from another YAESU
transceiver.
CODE:
The audio is output only when the SQL code of
the received signal matches the setting.
BREAK:
With the BREAK setting on, the audio is output,
whenever a signal is received from another sta-
tion with the BREAK setting on, regardless of
the code setting.

089 DIGITAL SQL CODE

Function: Sets the squelch code for digital mode.
Available Values: 000 - 126
Default Setting: 000
090 GM DISPLAY
Function: Sorts the group stations to be displayed when

using the GM function.

Available Values: DISTANCE/STRENGTH
Default Setting: DISTANCE
Description:
DISTANCE:
Active group member stations are displayed ac-
cording to their distance from this station, begin-
ning with the closest member station.
STRENGTH:
Active group member stations are displayed ac-
cording to their signal strengths, beginning with
the strongest signal first.
091 DISTANCE
Function: Sets the unit of measure to indicate the dis-
tance between your station and communication sta-
tions when using the GM function.
Available Values: km/mile
Default Setting: mile
FT-991 O M
peraTing anual