Resetting The Microprocessor - Yaesu FT-991 Operating Manual

b Y
efore
( o
r M
eSetting eMorieS
Use this procedure to reset (clear) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel ON/OFF switch to turn the
transceiver off.
2. While holding the A

in the front panel ON/OFF switch to turn the trans-
ceiver on. Once the transceiver comes on, you may
release the buttons.
n :
ote
The FT-991 cannot erase the memory channels "01"
(and "5-01" through "5-10": U.S. version).
M r
enu eSetting
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the programmed
memories.
1. Press the front panel ON/OFF switch to turn the
transceiver off.
2. While holding the MENU(SETUP) button in, press
and hold in the front panel ON/OFF switch to turn
the transceiver on. Once the transceiver comes on,
release the buttons.
F r
ull eSet
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared by this procedure.
1. Press the front panel ON/OFF switch to turn the
transceiver off.
2. While holding the FAST and LOCK buttons in,
press and hold in the front panel ON/OFF switch to
turn the transceiver on. Once the transceiver comes
on, release the buttons.
Page 10
b
ou eGin
r
eSetting the
)
nly
M button in, press and hold
M
icroproceSSor
ON/OFF Switch
ON/OFF Switch
ON/OFF Switch
F T-991 O
A M button

MENU(SETUP) Button
FAST Button LOCK Button
M
peraTing anual