Table of Contents
Advertisement
R
M
Use this procedure to reset (clear out) the previously stored
Memory channels, without affecting any configuration
changes you may have made to the Menu settings.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ A M ] button; while holding it
in, press and hold in the front panel [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
M
R
Use this procedure to restore the Menu settings to their
factory defaults, without affecting the memories you have
programmed.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ MENU ] button; while holding it
in, press and hold in the front panel [ POWER ] switch
to turn the transceiver on. Once the transceiver comes
on, release the buttons.
F
R
Use this procedure to restore all Menu and Memory set-
tings to their original factory defaults. All Memories will
be cleared out by this procedure.
1. Press the front panel [ POWER ] switch to turn the trans-
ceiver off.
2. Press and hold in the [ FAST ] and [ LOCK ] buttons;
while holding them in, press and hold in the front panel
[ POWER ] switch to turn the transceiver on. Once the
transceiver comes on, release the switches.
FT
5000 O
DX
PERATING
R
ESETTING THE
O
M
ANUAL
B
EFORE
M
ICROPROCESSOR
[ POWER ] Switch
[ POWER ] Switch
[ POWER ] Switch
Y
B
OU
EGIN
[ A M ] Button
[ MENU ] Button
[ FAST ] / [ LOCK ] Button
Page 7
Advertisement
Table of Contents
