Erasing Memory Channel Data; Moving Memory Data To The Vfo-A Register - Yaesu FT DX 3000 Operating Manual

M O
eMOry

Erasing Memory Channel Data

1. Press the [ V/M ] button, if necessary, to enter the
VFO mode.
2. Press the [ A M ] button. The data stored in the cur-

rently selected memory channel will be displayed in
the frequency field.
3. Rotate the [ CLAR/VFO-B ] knob to select the mem-
ory channel that you would like to erase. The memo-
ry channel number appears in the VFO-B frequency
display.
4. Press the [ LOCK ] button to erase the contents of the
selected memory channel.
a :
dviCe
 The FT 3000 can not erase the memory channels
DX
"01" (and "5M-01" through "5M-10": U.S. ver-
sion).
 If you make a mistake and wish to restore the memo-
ry's contents, just repeat steps (1) through (4) above.

Moving Memory Data to the VFO-A register

You may transfer the contents of the currently selected memory channel into the VFO-A register, if you like.
1. Press the [ V/M ] button, as necessary, to go to the
"Memory" mode. The memory channel number will
appear in the VFO-B frequency display.
a :
dviCe
If you can not enter the "Memory" mode, check to
see if the transceiver is in VFO-B mode (the green
[ VFO-B ( RX )] Indicator/Switch is illuminated). If so,
press the [ VFO-A ( RX )] Indicator/Switch to return
operation to VFO-A. Now, press the [ V/M ] button to
enter the "Memory" mode.
2. Press the [ MCH/GRP ] button. The orange LED in-
side the switch will light up, indicating that you are
ready to recall a memory channel.
3. Rotate the [ CLAR/VFO-B ] knob to select the
memory channel the contents of which you wish to
transfer to VFO-A.
4. Press and hold in the [ M
until you hear the double beep. The data in the se-
lected memory channel will now be transferred to
VFO-A.
a :
dviCe
This transfer of data to VFO-A does not affect the origi-
nal contents of the memory channel; this is a "copy"
function that leaves the memory contents unchanged.
Page 96
peraTiOn
s M
tandard
A ] button for one second,

o
eMory Peration
FT
DX
[ V/M ] Button [ A
[ LOCK ] Button
[ CLAR/VFO-B ] Knob
[ VFO-B ( RX )] Button
[ VFO-A ( RX )] Button [ V/M ] Button
[ M A ] Button

[ CLAR/VFO-B ] Knob
[ MCH/GRP ] Button
3000 O M
peraTing
M ] Button

anual