Table of Contents
Advertisement
ABS PLASTICS
ABS plastic components such as shower walls, tubs and exterior fenders will retain their
original beauty with reasonable care.
For cleaning:
1. Dust and wipe clean with soft, damp cloth or chamois, wiping gently.
2. Wax or polish with Simoniz,
After polishing, wipe gently with damp cloth to ground electrostatic charges which
may attract dust particles.
DO NOT use gritty or abrasive particle soaps or scouring compound to clean ABS
plastic.
CAUTION: Avoid using "Citrus" or biodegradable cleaners which contain
"D-Limonene." They will damage plastic materials.
FRAME
The frame of your Jayco recreation vehicle is painted with a water based paint. Road
debris will chip the paint, inviting rust and other deterioration. Periodically inspect the
exterior exposed areas, clean and repaint the steel members in insure a long life. If damage
would occur, the frame needs to be painted with e-coat paint and not a gloss black paint.
This type of paint is available in a spray from the vendor, Leland. To prevent rust or
corrosion, you may wish to purchase a commercially available rust treatment application.
DOORS, EXTRUSIONS, WINDOWS & VENTS
These components have putty tape between the component and the wall surface.
Portions of these items may have a cap seal added as a secondary seal. Inspect these seals
at least once per year. Both putty tape and cap seals can become damaged by U.V.
exposure, air pollution, freezing temperatures and exposure to the elements.
Locks on entrance and baggage doors need biannual lubrication. Silicone lubricant is
recommended. Conditions such as rain, salt, dust and pollution may increase the mainte-
nance needs.
FURNITURE
For Cloth Furniture: vacuum occasionally to remove dirt, dust and pet hair. Have steam
cleaned when necessary. Test fabric in an inconspicuous location before using any spot
cleaners.
For Synthetic Leather: wipe with a soft damp cloth for most dirt and spills, air dry. If
needed, use a small amount of a mild liquid detergent. For oil or grease stains, spray
immediately with an all-purpose spray cleaner or Tannery Car Care Cleaner. Take care
not to smear beyond the original stain. Rinse with clean water, air dry.
®
®
Aero-Wax,
or Glo-Coat
66
®
using flannel or jersey cloth.
Advertisement
Table of Contents
