Abs Plastics; For Cleaning; Bathroom Tub, Lavatory Sink; Cushions - Jayco Eagle 2006 Owner's Manual

ABS PLASTICS

ABS plastic components such as shower walls and tubs will retain their original beauty
with reasonable care.

For cleaning

1. Dust and wipe clean with soft, damp cloth or chamois, wiping gently.
2. Wax or polish with Simoniz,® Aero-Wax,® or Glo-Coat® using flannel or jersey
cloth. After polishing, wipe gently with damp cloth to ground electrostatic charges
which may attract dust particles.
Do NOT use gritty or abrasive particle soaps or scouring compound to clean ABS plastic.
Caution: Avoid using "Citrus" or biodegradable cleaners which contain
"D-Limonene." They will damage plastic materials.

BATHROOM TUB, LAVATORY SINK

The bath tub in your trailer is made of ABS plastic material. DO NOT use abrasive type
cleaners, as they may scratch surfaces. Use a mild detergent soap and warm water to clean
the tub surface. These cleaning instructions are similar to those recommended for
fiberglass tubs and walls. For any type of repair work, see your independent, authorized
dealer.

CUSHIONS

Caution: Do not dry clean vinyl components. Do not remove covers for dry cleaning.
If the cushions are dry cleaned, the vinyl on the reverse side of the cushion will shrink,
become hard and crack. Vacuum the fabric and wipe the vinyl surfaces. The fabric can be
gently steam cleaned on the cushions or mats if necessary.
All dinette and bed mat covers are treated with stain protector. Vacuum the cover with a
brush attachment periodically to remove dirt.

CLOTH FURNITURE

Vacuum occasionally to remove dirt, dust and pet hair. Have steam cleaned when
necessary. Test fabric in an inconspicuous location before using any spot cleaners.

BEDSPREADS

Dry clean only.
Eagle Conventional Travel Trailer and Fifth-Wheel Travel Trailer
Maintaining Your Investment...
85