Operating The Refrigerator Controls - N621 - Jayco Conventional Travel Trailer Owner's Manual

Operating the Refrigerator Controls – N621
CONTROL PANEL
Fig. 5-11
The refrigerator control panel is between the freezer compartment and the fresh food
compartment.
The ON/OFF button (1) starts and shuts down the refrigerator. If the refrigerator is shut
down, press the ON/OFF button to start the refrigerator in auto mode. If the refrigerator
is operating, press and hold the ON/OFF button for two seconds to shut down the
refrigerator.
The TEMP SET button (2) controls the temperature adjustment of the freezer and the
fresh food compartment. The temperature adjustment that you select does not change if
the mode of operation of the refrigerator changes. Press the TEMP SET button and the
temperature setting "1-9" appears in the center display (3). Push and hold the TEMP
SET button and the temperature setting changes. The number "9" is the coldest tempera-
ture setting.
The MODE button (8) controls the operation mode of the refigerator. Push and hold the
MODE button and a light bar flashes in the center display beside each of the four
operating modes of the refrigerator, one at a time. There is one automatic mode of
operation, and three manual modes of operation. When the light bar flashes beside the
mode of operation that you wish, release the MODE button.
AUTOMATIC MODE OPERATION
When you select AUTO mode, the refrigerator controls automatically select the most
efficient energy source that is available for operation. If a more efficient energy source
becomes available, the refrigerator controls change from the current energy source to the
more efficient energy source.
If an energy source is available to the refrigerator, but is not operating correctly: A fault
code appears in the center display. The refrigerator controls try to change to a less
efficient energy source. If a less efficient energy source is not available, the refrigerator
stops operation. Refer to the "Fault Codes" in the manufacturer's owner's manual.
60