Table of Contents
Advertisement
COMPONENT
LP Gas System
Appliances
Sealants
Inspect and seal cor-
Roofs
MAINTENANCE
Beginning of each camping trip:
1. Inspect all gas lines for
crimps and road damage.
2. Check all lines and connec-
tions for leakage with soapy
water or leak detector.
3. Have the regulator checked
and adjusted to the proper
pressure once per year by a
qualified dealer.
To care for brushed chrome it is
recommended to clean with a
mild soap and water. Wipe dry
with a soft cloth. Apply a light
coat of oil such as baby oil
periodically.
Various items on these appli-
ances need to be cleaned peri-
odically as need be, such as
burner orifices, etc. See individ-
ual booklets for directions or see
your dealer.
All sealants used in construction
are subject to weather elements.
Tape sealants used around
doors, windows, extrusions, are
subject to dry-out conditions
by sunlight and water seepage.
Inspect sealants at least twice a
year and look for dried-out,
cracking conditions. Reseal at
least once per year.
ners at threshold once a year.
All roofs require maintenance.
At least twice per year, inspect
and reseal all seams: front and
rear, around all vents, and along
all moldings. If you notice any
deterioration in the seal, scrape
off any cracked or loose sealant
and then reseal the area.
75
AVOID
DO NOT smoke while chang-
ing bottles or any lines.
DO NOT allow connections to
be loose.
DO NOT use steel wool, am-
monia, acids, or abrasives on
chrome surfaces.
Using poor quality sealing
materials. Ignoring sealed areas.
Not resealing once per year.
Entrance Door
Not resealing once per year.
Advertisement
Table of Contents
