Table of Contents
Advertisement
2.
Remove the cover. On the model N621, pull the cover toward the front of the
refrigerator. On the model N841, push the cover toward the rear of the refrigerator.
3.
Remove the light bulb from the holder.
NOTE: Use only a GE#214-2 bulb as the replacement bulb. This bulb is available at most
retail automotive parts centers.
4.
Install the replacement bulb.
5.
Install the cover.
6.
Connect the DC power supply wires to the power board at the rear of the
refrigerator.
Door Alarm
The refrigerator has an alarm to alert you if the fresh food compartment door is not fully
closed. The refrigerator continues to operate, but if the fresh food compartment door is
open and the interior light remains on for two minutes:
• An audible alarm starts.
• "dr" appears in the center display.
• Light turns off.
Close the door to silence the alarm.
Backup Operating System
This refrigerator has a backup operating system. The backup operating system allows the
refrigerator to continue to cool if the temperature sensor of the refrigerator should fail. If
this failure occurs, the refrigerator automatically changes to the backup operating system.
When you push the TEMP SET button, the temperature setting flashes in the center
display for ten seconds. After the temperature setting flashes, the mode of operation
appears in the center display.
NOTE: If you open the door(s) too often, the temperatures inside the freezer and fresh
food compartment do not become stable. Allow the refrigerator to operate for about one
hour after each adjustment change before to examine the contents. The number "9" is the
coldest temperature setting.
Have the refrigerator serviced by your dealer or an authorized Norcold Service Center as
soon as possible.
59
Advertisement
Table of Contents
