Refrigeration Systems; Air-Cooled; Water-Cooled; Table 1. Design Data - Cornelius FCB 3 H.P. POST-MIX DISPENSER Installation & Service Manual

CAUTION: Before shipping, storing, or relocating Unit, syrup systems must be sanitized
and all sanitizing solution must be purged from syrup systems. All water must also be
purged from plain and carbonated water systems. A freezing ambient environment will
cause residual sanitizing solution or water remaining inside Unit to freeze resulting in damage to
internal components.
Unit Part Number:
Two-Flavor 3 H.P. (Air--Cooled)
Two-Flavor 3 H.P. (Water-Cooled)
Overall Dimensions:
Height
Width
Depth (W/O Drip Tray)
Depth W/Drip Tray
Shipping Weight (approx)
Compressor Horsepower
Refrigeration System:
Refrigerant Type and Charge
Ambient Operating Temp.
Electrical Requirements:
Operating Voltage
Current Draw

REFRIGERATION SYSTEMS

NOTE: The FCB Dispenser (depending upon the model number) refrigeration system is either
"air-cooled" or "water-cooled".

"AIR-COOLED"

The "air-cooled" FCB Dispenser refrigeration system is equipped with a condenser coil that is cooled by a
condenser coil fan.

"WATER-COOLED"

The "water-cooled" Two-Flavor FCB Dispenser refrigeration system is equipped with a Refrigeration Cooling Coil
Assembly that contains both refrigerant and plain water cooling coils. Circulating cool plain water through the
cooling coil cools the refrigerant also inside the coil. During installation, City cold plain water is connected to the
FCB Dispenser Refrigeration Cooling Coil water inlet line labeled "COOLING WATER IN". The water drain line
labeled "COOLING WATER OUT" must be routed to and be connected to a permanent drain.
312026000

Table 1. Design Data

2
4166200000
4166220000
60-1/2 inches
19-1/4 inches
32-1/2 inches
38 inches
466 pounds
3 H.P.
See Unit
Nameplate
40° F to 100° F
See Unit Nameplate
See Unit Nameplate