Main Window; Home Screen: Router Mode; Figure 15 Web Configurator Home Screen In Router Mode (Zywall 5); Table 4 Web Configurator Home Screen In Router Mode - ZyXEL Communications 5 Series User Manual

3.4.2 Main Window

The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
Right after you log in, the HOME screen is displayed. The screen varies according to the
device mode you select in the MAINTENANCE > Device Mode screen.

3.4.3 HOME Screen: Router Mode

The following screen displays when the ZyWALL is set to router mode. This screen displays
general status information about the ZyWALL. The ZyWALL is set to router mode by default.
Not all fields are available on all models.
WAN 2 refers to either the physical WAN 2 port on a ZyWALL with multiple WAN ports or
the 3G card on a single WAN ZyWALL in router mode.

Figure 15 Web Configurator HOME Screen in Router Mode (ZyWALL 5)

The following table describes the labels in this screen.

Table 4 Web Configurator HOME Screen in Router Mode

LABEL
Automatic Refresh
Interval
Refresh
System
Information
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Select a number of seconds or None from the drop-down list box to update all
screen statistics automatically at the end of every time interval or to not update
the screen statistics.
Click this button to update the status screen statistics immediately.
Chapter 3 Introducing the Web Configurator
65