To Copy Using The "Set Numbering" Function - Oce cm3521 User Manual

8

To copy using the "Set Numbering" function

1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original"
on page 3-7.
2
Touch [Application], and then touch [Stamp].
– To cancel all settings for the Application functions, touch [Reset].
The Stamp screen appears.
3
Touch [Set Numbering].
The Set Numbering screen appears.
4
Using the keypad, type in the starting number.
– The starting number can be set between 0 and 9999.
– The distribution number is normally printed as a four-digit number.
If "Start Number" is set to "1", "0001" is printed.
– To print the stamp only on the front cover page, touch [Cover Only].
8-76
Application functions
cm3521