Oce cm3521 User Manual page 207

3
the original length is 11-11/16 inch or less, the holes are punched
along the long side of the paper. If the original length is more than
11-11/16 inch, the holes are punched along the short side of the pa-
per.
– If "Auto" is selected, the punched hole position is set at the top or
at the left.
– To cancel changes to the punched hole position, touch [Cancel].
– To specify the output tray, touch the button for the desired tray un-
der "Output Tray".
4
Touch [OK].
The Basic screen appears again.
3-78
Basic copy operations
cm3521