Oce cm3521 User Manual page 309

5
– If the punch kit is in-
stalled, pull out the
hole-punch waste
container FN3.1.
6
Return guide FN3 to its original position.
– If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
7
Turn dial FN4 to feed the
paper, open the trans-
port unit cover, and then
pull out any paper.
8
Turn dial FN5 or dial
FN6, and then pull out
any paper.
5-54
FN3.1
FN4
Troubleshooting
FN5
FN6
cm3521