Additional copy operations
4
Touch [Check Job].
The Mode Check screens for the copy job appear. There are five Mode
Check screens. The number of the currently displayed screen appears
to the right of the screen title.
The buttons for functions where the setting has been changed from the
default appear selected.
5
Check the copy settings registered with the selected copy program.
6
Touch [Job End].
The Recall Copy Program screen appears again.
Can different settings be displayed?
?
% To display the previous screen, touch [←Back]. To display the next
screen, touch [Fwd.→].
7
Again touch the button for the program with the desired copy settings.
–
If [OK] is touched with no copy program selected, the Basic screen
appears again without a copy program recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen ap-
pears again.
cm3521
4
4-15