Basic copy operations
10
Load the next batch of the original, and then press the [Start] key.
–
Repeat this step until all pages of the original have been scanned.
–
To change the scanning settings, touch [Change Setting]. For de-
tails on changing the scanning settings, refer to "To change scan
settings for each original" on page 3-28.
–
The buttons that appear in the Change Setting screen differ de-
pending on the specified settings. Settings for the following can be
changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
11
After all original pages have been scanned, touch [Finish].
–
If the "Print Setting for Separate Scan" parameter is set to "Batch
Print", touch [Yes] in the screen that appears, requesting confirma-
tion that scanning of the original is finished. Otherwise, touch [No]
is touched to return to step 9.
cm3521
3
3-17